Survey on Energy Efficient Smart Street Light System
Abstract
This paper introduces a smart street light controlling system to boost energy efficiency of the city. Now a days people are so busy that they rarely find the time to switch OFF the light when it has no use. This results in consumption of lot of energy. This paper proposes the system where street light changed to ON state in the evening before sun sets and they are switched off in the morning after sunrise when there is enough light on the street. This leads to reduce of energy consumption. In this system the movement of vehicle and human is detected on highways to switch on a chunk of street light ahead of it and switch off the trailing lights. This is achieved by processing the image of the object and sending control message to the street light block. Additional feature of the system such as using a suitable sensors of the detection of failed street light and then sending the SMS to control authority using GSM mode to take appropriate action regarding failure
References
[2] “Intelligent Smart Streetlight system In a Smart City” 2014 IEEE Emerging Technology and Factory Automation (ETFA) 978-1-4799- 4845-1/14/$31.00 c 2014 IEEE
[3] “Streetlight Intelligent Remote Control System based on Wireless
[4] U. Gargi, R. Kasturi and S. H. Strayer. “Performance Characterization of Video Shot-change Detection Methods”. IEEE Trans. on Circuits and Systems for Video Technology.
[5] R. Lienhart.” Comparison of Automatic Shot Storage and Retrieval for Image and Video Databases”, Boundary Detection Algorithms. Volume 3656.
[6] C.-W. Ngo, T.-C. Pong and H.-J. Zhang.” On Clustering And Retrieval of Video Shots through Temporal Slices Analysis”, IEEE Trans. On Multimedia, 4(4), pages 446- 458, 2002. [7] E. Sahouria and A. Zakhor.”Content Analysis of Video using Principal Components”. IEEE Trans. on Circuits and Systems for Video Technology , CSVT-9, pages 1290-1298, 1999 . [8] G. Stockman and L. Shapiro, Computer Vision. Prentice Hall, 2001.
[9] R. Zabih, J. Miller and K. Mai. “A Feature-based Algorithm for Detecting Cuts and Classifying Scene Breaks”. In Proc. ACM Multimedia, pages 189-200, 1995
[10] Thomas Novaks and Heimo Zeilinger ,“Intelligent Smart Streetlight system In a Smart City” 2014 IEEE Emerging Technology and Factory Automation (ETFA) 978-1-4799-4845-1/14/$31.00 c 2014 IEEE
[11] A New Streetlight Monitoring System Based On Wireless Sensor Networks” IEEE 2010.
[12] E. Sahouria and A. Zakhor. “Content Analysis of Video using Principal Component”s. IEEE Trans. on Circuits and Systems for Video Technology, CSVT-9, pages 1290-1298, 1999.
[13] “Automatic Street Light Intensity Control and Road Safety Module Using Embedded System” International Conference on Computing and Control Engineering (ICCCE 2012), 12 & 13 April,2012.
To ensure uniformity of treatment among all contributors, other forms may not be substituted for this form, nor may any wording of the form be changed. This form is intended for original material submitted to AJCT and must accompany any such material in order to be published by AJCT. Please read the form carefully.
The undersigned hereby assigns to the Asian Journal of Convergence in Technology Issues ("AJCT") all rights under copyright that may exist in and to the above Work, any revised or expanded derivative works submitted to AJCT by the undersigned based on the Work, and any associated written, audio and/or visual presentations or other enhancements accompanying the Work. The undersigned hereby warrants that the Work is original and that he/she is the author of the Work; to the extent the Work incorporates text passages, figures, data or other material from the works of others, the undersigned has obtained any necessary permission. See Retained Rights, below.
AUTHOR RESPONSIBILITIES
AJCT distributes its technical publications throughout the world and wants to ensure that the material submitted to its publications is properly available to the readership of those publications. Authors must ensure that The Work is their own and is original. It is the responsibility of the authors, not AJCT, to determine whether disclosure of their material requires the prior consent of other parties and, if so, to obtain it.
RETAINED RIGHTS/TERMS AND CONDITIONS
1. Authors/employers retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors/employers may reproduce or authorize others to reproduce The Work and for the author's personal use or for company or organizational use, provided that the source and any AJCT copyright notice are indicated, the copies are not used in any way that implies AJCT endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Authors/employers may make limited distribution of all or portions of the Work prior to publication if they inform AJCT in advance of the nature and extent of such limited distribution.
4. For all uses not covered by items 2 and 3, authors/employers must request permission from AJCT.
5. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
INFORMATION FOR AUTHORS
AJCT Copyright Ownership
It is the formal policy of AJCT to own the copyrights to all copyrightable material in its technical publications and to the individual contributions contained therein, in order to protect the interests of AJCT, its authors and their employers, and, at the same time, to facilitate the appropriate re-use of this material by others.
Author/Employer Rights
If you are employed and prepared the Work on a subject within the scope of your employment, the copyright in the Work belongs to your employer as a work-for-hire. In that case, AJCT assumes that when you sign this Form, you are authorized to do so by your employer and that your employer has consented to the transfer of copyright, to the representation and warranty of publication rights, and to all other terms and conditions of this Form. If such authorization and consent has not been given to you, an authorized representative of your employer should sign this Form as the Author.
Reprint/Republication Policy
AJCT requires that the consent of the first-named author and employer be sought as a condition to granting reprint or republication rights to others or for permitting use of a Work for promotion or marketing purposes.
GENERAL TERMS
1. The undersigned represents that he/she has the power and authority to make and execute this assignment.
2. The undersigned agrees to indemnify and hold harmless AJCT from any damage or expense that may arise in the event of a breach of any of the warranties set forth above.
3. In the event the above work is accepted and published by AJCT and consequently withdrawn by the author(s), the foregoing copyright transfer shall become null and void and all materials embodying the Work submitted to AJCT will be destroyed.
4. For jointly authored Works, all joint authors should sign, or one of the authors should sign as authorized agent
for the others.
Licenced by :
Creative Commons Attribution 4.0 International License.
