Generation of Electricity by Solar Using Programmable System on Chip

  • Deshmukh P R University of Pune
  • V S Kolkure
Keywords: component, style, formatting, styyling, insert

Abstract

New technological development efficiency of solar cell is increasing every day and it is becoming cheap also for use in regular day to day production of energy. Along with this government is also providing help and subsidies in set up of new solar power plant. This all things together provide a great new platform for setup and generation of new solar power plant for individual customer. This proposed system will try to bring all component and aspects of generating energy from solar cell easy, convenient and in user friendly way for non-technical person, by using latest development in the field of electrical and electronics.

References

[1] Waseda University, Tokyo, Japan “Development of PSoC Microcontroller Based Solar Energy Storage System” SICE Annual Conference 2011 September 13-18, 2011, [2] Eugene V. Solodovnik, Shengyi Liu, Senior Member, IEEE, and Roger A. Dougal, Senior Member, IEEE “Power Controller Design for Maximum Power Tracking in Solar Installations” vol 19, NO. 5, sep 2004. [3] Technology White Paper on “Solar Energy Potential on the U.S. Outer Continental Shelf Minerals Management Service Renewable Energy and Alternate Use Program “ U.S. Department of the Interior May 2006 [4] R. B. Darla, S. R. Kurode “Continuous Conduction Mode SEPIC Converter For Maximum Power Point Tracking” IEEE ACE 2003. [5] H.S Hung Chung, K.K.Tse ”a novel maximum power point tracking technique for a solar panels using a SEPIC or CUK converter.” IEEE Trans power Electronic vol.18 no.3 may2003. [6] K.Ktse. S.h Chung “A Novel Maximum Power Point Tracker For PV panels using Switching frequency Modulation” IEEE Trans on power electronics vol 17 no 6 Nov 2002. [7] Y Kuo, T Liang, and J Chen, “Novel maximum power point tracking controller for photovoltaic energy conversion system,” IEEE Trans. Ind. Electron, vol. 48, no.3,pp. 594-601, Jun. 2001. – 721 [8] D.C.Martins, A.H de Oliveira”Three Phase Rectifier Using a SEPIC DCDC Converter in continuous conduction mode for power factor correction” IEEE 1998 [9] “A Hybrid Solar-Wind Power Generation System as an Instructional Resource “for Industrial Technology Students 2000. [10] PSoC® 3 Development Kit Guide. [11] Cypress Semi PSoC1™ product documentation [12]Vendelin, Pavio, Rohde: Microwave circuit design using linear and nonlinear techniques [13]Analog Devices Inc, ADI: DDS and Fractional-N synthesizer product data [14] Anatol I. Zverev: Handbook of filter synthesis
[15] B. Parsons et al., Grid Impacts of Wind Power Variability: Recent Assessments From a Variety of Utilities in the United States, National Renewable Energy Laboratory, Tech. Rep. NREL/CP-500-39955, 2006
Published
2017-12-17
How to Cite
R, D., & Kolkure, V. (2017). Generation of Electricity by Solar Using Programmable System on Chip. Asian Journal For Convergence In Technology (AJCT) ISSN -2350-1146, 1(1). Retrieved from http://www.asianssr.org/index.php/ajct/article/view/94
Issue
Vol 1 (2015): Issue V
Section
Article

To ensure uniformity of treatment among all contributors, other forms may not be substituted for this form, nor may any wording of the form be changed. This form is intended for original material submitted to AJCT and must accompany any such material in order to be published by AJCT. Please read the form carefully.
The undersigned hereby assigns to the Asian Journal of Convergence in Technology Issues ("AJCT") all rights under copyright that may exist in and to the above Work, any revised or expanded derivative works submitted to AJCT by the undersigned based on the Work, and any associated written, audio and/or visual presentations or other enhancements accompanying the Work. The undersigned hereby warrants that the Work is original and that he/she is the author of the Work; to the extent the Work incorporates text passages, figures, data or other material from the works of others, the undersigned has obtained any necessary permission. See Retained Rights, below.

AUTHOR RESPONSIBILITIES
AJCT distributes its technical publications throughout the world and wants to ensure that the material submitted to its publications is properly available to the readership of those publications. Authors must ensure that The Work is their own and is original. It is the responsibility of the authors, not AJCT, to determine whether disclosure of their material requires the prior consent of other parties and, if so, to obtain it.

RETAINED RIGHTS/TERMS AND CONDITIONS
1. Authors/employers retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors/employers may reproduce or authorize others to reproduce The Work and for the author's personal use or for company or organizational use, provided that the source and any AJCT copyright notice are indicated, the copies are not used in any way that implies AJCT endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Authors/employers may make limited distribution of all or portions of the Work prior to publication if they inform AJCT in advance of the nature and extent of such limited distribution.
4. For all uses not covered by items 2 and 3, authors/employers must request permission from AJCT.
5. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.

INFORMATION FOR AUTHORS
AJCT Copyright Ownership
It is the formal policy of AJCT to own the copyrights to all copyrightable material in its technical publications and to the individual contributions contained therein, in order to protect the interests of AJCT, its authors and their employers, and, at the same time, to facilitate the appropriate re-use of this material by others.
Author/Employer Rights
If you are employed and prepared the Work on a subject within the scope of your employment, the copyright in the Work belongs to your employer as a work-for-hire. In that case, AJCT assumes that when you sign this Form, you are authorized to do so by your employer and that your employer has consented to the transfer of copyright, to the representation and warranty of publication rights, and to all other terms and conditions of this Form. If such authorization and consent has not been given to you, an authorized representative of your employer should sign this Form as the Author.
Reprint/Republication Policy
AJCT requires that the consent of the first-named author and employer be sought as a condition to granting reprint or republication rights to others or for permitting use of a Work for promotion or marketing purposes.

GENERAL TERMS

1. The undersigned represents that he/she has the power and authority to make and execute this assignment.
2. The undersigned agrees to indemnify and hold harmless AJCT from any damage or expense that may arise in the event of a breach of any of the warranties set forth above.
3. In the event the above work is accepted and published by AJCT and consequently withdrawn by the author(s), the foregoing copyright transfer shall become null and void and all materials embodying the Work submitted to AJCT will be destroyed.
4. For jointly authored Works, all joint authors should sign, or one of the authors should sign as authorized agent
for the others.

Licenced by :

Creative Commons Attribution 4.0 International License.

 

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.